I am trying to do an idoc to email scenario. I have successfully have it working. The email comes out with the payload.txt and payload.xml. I some have managed to add one more attachment that i wanted to send out, which is coming out as expected. but now i dont want to send the payload.txt and payload.xml as an attachment in the email.
Note: i am using a mail adapter and using messageTransformbean.
Thanks in Advance
Thrinath
Hi All, some time while trying to get the data from SuccessFactors(SFS) I'm seeing ODATA calling error in SAP PO. Please see the attached file.
It would be helpful if you can let me know any workaround for this issue?
Thanks
Hi,
I have a custom idoc and I want to import the meta data into our system. When I attempt to import it I receive an error
But when I attempt to import it into our dual stack 7.11 system from the same ECC system via IDX2 it works.
I am told that the iDoc is not released and that may be the problem BUT as I can import it into PI but not PO I am assuming that PO is a little more fussy about this. Can anyone suggest a solution, except for releasing the iDoc?
Hi all Expert,
Anybody knows that how to change timestamp manually in SAP PO from receiver side in java stack system.
we required timestamp yyyymmdd_hhmmss_sss instead of yyyymmdd-hhmmss-sss.
Regards,
Ankit Patel
Dear colleagues
In SE16 in SXMSPMAST table I found records with old dates with values in ITFACTION field ARCH, DEL.
Could you please help me resolve this issue? How to check theconsistency ofthe queue?
Thanks a lot,
Alexander
,
Hi folks,
I am facing a problem on my JMS channel(Both Sender & Reciever)
PI Version : 7.4 PO EHP 8.
Using SAP NW JMS provider, no 3rd party providers used.
The channel keeps failing automatically because of the below error
Transmitting the message to endpoint <local> using connection IDoc_AAE_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.jms.core.fsm.DFA$InvalidTransitionException: No transition found from state: ERROR, on event: process_commence for DFA: CC_JMS_RCV_Channel_Name:79faed34628a39cc8626e4f20fa40181
After starting & stopping the channel manually, it goes to green & the files in the queue are automatically picked up & processed. Hence most of the time i have to do this to process the messages.
So I would like to know whether there is any configuration to prevent the channel from failing.
Screenshot below regarding the channel parameters
Hi Experts,
We want to migrate ABAP mapping interface(.csv File to idoc(1:n)) to new PO 7.4 single stack from PI 7.11 dual stack.
We tried with RFC functional module but no luck.
Please suggest how can we over come this situation.
Below is the samle file which is getting from source
<?xml version="1.0" encoding="UTF-8"?><ns0:MT_FI_Documents xmlns:ns0="http://xxxx.com/source/PI/target/FI_AccDoc_xxxx"><FI_Documents><FI_Document><order_id>1783783,null,2014-10-14 03:33:53.0,PRE_PAID,ACTIVE,null,NEW,ACTIVE,27a5a9fec2644b73b036e86cde146368,2015-09-01 00:22:52.0,191044,3537355,477715,Anders,Widestrand,anders.widestrand@ockerobussarna.se,ckerbussarna AB,358867,Box 1031,CKER,null,47522,null,null,null,null,348383,Microsoft,Office 365 Small Business Premium,Small Business,RECURRING,MONTHLY,2015-09-01 00:00:00.0,2015-10-01 00:00:00.0,N,N,null,null,null,null,SEK,98.00,0.00,234274,41.65,53.9,2.45,98.00,0.425,0.55,0.025,98.00,ITEM,RECURRING</order_id></FI_Document></FI_Documents></ns0:MT_FI_Documents>
Hi,
I am trying to setup the sender REST adapter to poll a rest service. But prior to make the rest call, I want to make a call to get a session id where I pass the user id and password. In response to the login call I get the session id. This session id I need to pass in the HTTP call in the HTTP header.
Regards
Ravijeet
Hello techies,
Currently we are working in 7.4 dual stack, we are unable to send/test a message from RWB tool from one of the dev0 system in track0 but through dev1 in track1 can be able to send a message.
Also, we can able to send/test a message from other env's like QA & Prod systems in both tracks. Searched some blogs but doesn't helpful and wokred with security team and basis team but no luck. Finally raised an OSS note and given trace files by executing <host>:<port>/tshs to SAP but still issue is going on..
Any suggestions or help much appreciated.Attaching the screen shots for ref.
Hi Experts,
Currently we have a scenario to integrate from ERP system to third part system through SAP PO. The ERP and SAP PO resides inside intranet. The third party system is exposed to internet and can be communicated using web service call. The third party system can be reached only through proxy server. So we configured proxy server in our target channel (SOAP 1.1 protocol). Whenever a message is triggered from ERP system, the PO system monitoring shows message successfully delivered to end point URL. But the target system says it hasn't received any messages from PO system. We tried to test using SOAP UI tool to know whether web service is down but we are able to post messages through SOAP UI. Whenever actual message is triggered we are not able to see messages in target system. Kindly help us on the issue.
Thanks & Regards
Vijay S B
Hi Guys
A customer in a process of migrating their BPM and PI systems into a PO based in HANA.
What would be the sizing specs or recommendations for Implementing this solution with HANA database.
If there is a note regarding this it would help, but if you have a previous experience would be highly valuable to understand how estimated hardware sizing
Thanks!
Hi
I have developed p-2-p interface using iflow and it is working alright.
During code review, I was advised to change the service interface name.
When I did that one, iflow asked to renew the service interface as old one won't exists.
When I said YES, it dropped off the communication channel and OM objects.
There was no issue with OM as I picked that up again from pop-up selection.
But the problem is communication channel. I am not able to pick-up the old one <IFLOWNAME_CHANNELNAME)which I have configured with channel parameters. I ended up doing everything a fresh.
1. Is there a way, I can save this Communication channel so that no need to configure every time I make small changes ?
2. Is there a way, to copy IFLOW1 Communication channel to IFLOW2 so that no need to configure manually every time ?
Thanks
Kumar
Hi Experts,
What is the difference between HANA support provided for PI dual stack vs single stack?
This is in context of using PI as middleware for integrating with HANA cloud.
Any pointers shall be helpful.
Thanks,
Alpa.
Hello SCN Team,
We are on PO 7.4 and trying to install axis jars, but getting an exception during deployment.
We have followed the procedure as provided by SAP in Note 1028961.
The JDBC drivers have already been deployed to the system successfully and working fine.
Error Message:
Deployment: Aborted
Runtime name of Component
[sap.com~com.sap.aii.af.axisproviderlib] is changed from
[com.sap.aii.adapter.lib] to [com.sap.aii.af.axisproviderlib]. Please, first
remove this DC and proceed with deployment.
If anyone has encountered a similar issue please provide your
valuable inputs.
We have tried the below options with no luck.
NWDS, Telnet deployment methods.
Increasing the version in Manifest file of SDA.
Thanks.
Best Regards,
Sudharshan N A
Hi,
is there a (feature) comparison of existing PI Salesforce adapters available?
I know there are adapters available from Advantco, itelligence, Skyvaa, Seeburger.
How do they compare? Are all of them certified by SAP?
Cheers
Gerald
Hi,
We are trying to cancel a in progress BPM process thru managed process - actions - cancel and we are getting "problem during operation" problem.
Is there any way to cancel this BPM process aside from the Managed process?
most of the solution says that we should use tcode SWWL but this is on single stack (java only) installation.
Thank you.
Dear community:
How can I import from Process Orchestration a Bizagi BPM model?
Best regards.
Hi, Once I am creating a communication channel in NWDS , I am not able to see it in NWDS. But directly in web application I can see that this communication channel is created already.When I activate this channel,I am able to see it again on NWDS. Could you please help to resolve this issue?
Hi all Expert,
Anybody knows that how to change timestamp manually in SAP PO from receiver side in java stack system.
we required timestamp yyyymmdd_hhmmss_sss instead of yyyymmdd-hhmmss-sss.
Regards,
Ankit Patel
Hi Guys
Sorry , it can be a repeated question but I have been trying to gte the free PO trial version without luck.
I tried to follow this link " Try SAP Netweaver Process Oechestration in public cloud , but can not get any further to download button..
any other link.
Thanks.