Hi Experts,
We have renewed SSL certificate recently in our PO QA system after which we are facing chain issues(incorrect order extra certs contains anchor).
Below is the screenshot from ssllabs. I have checked for any extra certificates but nothing seems to be improper. Did any one ever came across this kind of scenario? Any suggestion would be most helpful.
Please help me with this
how to pesist Duraton of Sync message processing?
This is a synchronous scenario, SOAP, sebservice, then I need statistics of processing time. Like this first immage.
Then I can see Start Time and End Time different. And Duration is calculated right.
BUT If the process sent more messages, then in pimon Start time and End time for old records become equals, and duration is 0.
The following imege show Same Message IDs with no duration, after sending more messages for the same interface
Thanks for your help
Hi All,
hope all are doing well.
Currently i am working on sap po 7.4 single stack.
i am working on one scenario from file to http_aae . here i am picking PDF file from SAP and sending to thirdparty via HTTP_AAE receiver adapter.
i wanted to know the parameters to pass the same filename from file to http_aae with out mapping.
can you please help me to resolve this asap
Thanks
Madhu T
Hello Everyone,
Could someone guide me if it wise to move from SAP PI 7.31(dual stack) with only 4 small BPM scenarios to SAP PO(Single stack +BPM+BRM) 7.5?
I do understand that SAP has a Content migration tool to help move dual stack objects to a single stack.
However as I understand to utilize PO 7.5 to its true powers we need to create the I-Flows.
In this case should all the present scenarios should be built again from scratch.
I am currently looking at finding ways of cost reduction and time spent on the upgrade please suggest with the same.
Hi,
Can any one use sfsf adapter with Odata api on sender side Plz let me know.
Thanks,
Surya
Hi Experts,
we are working on Database-Ecc(Proxy)_Database synchronous communication .
1) Here we created all ESR and ID objects.
2) We are able to send data to ECC successfully
3) We are not able to pick the response from ECC
Please find below screen shots.
And please find below screen shots of ABAP code for inbound proxy. if we miss any thing on please let me know.
Please help me need full.
Thanks,
Raju
Hi All
We have a customer who is implementing PI/PO for the first time and would like to understand the licence requirements to be able to use PO 7.4.
I'm aware that there are two types of licences for PI - volume based and CPU based.
What is required in terms of licencing to install and run PO or does any licence allow a customer to run PO? Is it just a case of choosing a usage type?
Thanks
Riaz
Hi,
I have a scenario where there is a search interface which calls create interface if search count is 0 or calls update interface if search is 1. There is a case where search returns count as 2, in this case the process should end in an error.
Can anyone please let me know how to end NetWeaver BPM process in error.
Thanks & Regards,
Hamsa
Dear Experts,
Scenario here IDoc to File in PI 7.31 single stack, based WERKS field value in the incoming IDoc the file should be routed to a FTP folder in respective system of mine. Please suggest.
Thanks,
Nithin.
Hi Experts,
Currently we are working on SAP PI 7.31 SP11 single stack and I have downloaded nwds-extsoa-7.3-EHP1-SP13-PAT0009-win32 version but the deployment of iFlow getting failed due to the same reason as in blog http://scn.sap.com/thread/3871645 can you please suggest which version to NWDS to be installed ? Please find the snippet showing version of PI installed.
Thanks,
Naveen.
Experts,
The master guide for SAP NW 7.5 states that "Process Orchestration runs on one system. The deployment on more than one system is not supported.".
Please let me know what that means as the statement is not very clear.
Does that relate to single SID?
Regards,
Neeraj
Hi Experts,
We are in the midst of migrating our PI 7.11 to PO 7.4. I tried to export the objects of one of the interface from the production server in PI and import the TPZ file into the development server in PO 7.4. However, the objects does not appear at all in the namespace in the PO. I have tried the below steps but it is not helping. Any idea how to solve this? Hope to get it solved. Thanks.
Steps taken:
Regards,
Shawn
Can anyone help me with the SAP PI Integration with Magento ecommerce site? Do our SOAP webservice supports magento integration?
Hi Experts
iam new for B2B Adapter, can any one explain AS2 requirement for inbound and outbound.
1. what is AS2 addapter and Why?
2. can i know what is the information need from customer to develop AS2 Adapter for both Inbound and Outbound?
3. certificate is mandatory?
Regards
Pradeep A
Dear Folks,
Hope all are doing good.
We are trying to establish the Connectivity between 2 ECC clients (Not Systems) and 2 SAP PO systems. Please find below is the requirement, whereas we are facing error while testing ABAP PROXY in SECOND CASE.
ECC: We have 2 different clinets in the same ECC system (100 and 200)
SAP PO: Running on JAVA only stack and single SLD for both SAP PO systems. We did all the configuration setting between below said systems and follow the URL's to fix the issue. But still there is no change in error, Please share your experience and valuble suggestion to fix the issue.
Requirement:
1) ECC 100 to SAP PO system - DEV - WORKING
2) ECC 200 to SAP PO system - QAS - NOT WORKING and below is the error.
Error in SPROXY and message not reaches to SXMB_MONI:
GET_BUSINESS_SYSTEM_ERROR An error occurred when determining the business system (LD_ERROR)
Follow all the steps from below URL's
https://scn.sap.com/thread/229118
http://scn.sap.com/thread/1108954
Regards,
MF. Haq
Hello experts,
We are receiving an invoice(.csv) file which should be converted to below structure which has 3 levels.
In Content Conversion, i set the parameter 'recordsetStructure = Header,1,Item*,SplitItem,*'. The problem with this is after 1st line item, the system is trying to create another header record.
Expected:
<Invoice>
<Header>
<Item>
<Split Item>
</Split Item>
</Item>
<Item>
<Split Item>
</Split Item>
</Item>
<Item>
<Split Item>
</Split Item>
</Item>
</Header>
<Invoice>
Actual:
<Invoice>
<Header>
<Item>
<Split Item>
</Split Item>
</Item>
</Header>
</Invoice>
<Invoice>
<Item>
<Split Item>
</Split Item>
</Item>
</Invoice>
<Invoice>
<Item>
<Split Item>
</Split Item>
</Item>
</Invoice>
How should i build the parameters to get the expected XML structure?
Regards,
Vishnu
Hi Experts,
I am trying to generate PDF with password using adapter module. Followed the below link -
Creating Password Protected PDF file and Zipping it Using SAP PI
While testing I am getting the error as -
I checked the JNDI name, its correct but still I am getting this error.
Also, I checked the JNDI registry, and I can find some file logs related to my adapter module. PFB the snapshot for the same.
Can you please suggest, where I am doing the mistake and where can i check it?
Thanks,
Nidhi Srivastava
Hi Folks,
I am working on conversion of Flatfile in sender side.
Here my requirement is having the field name in substructure to be optional.
For example:
Recordset
A
B
C
D
E
F
In this I want to set "E" and "F" to be optional.
Because in one set of files these fields will not appear.
Reagards,
Pavithra.R
Hello All,
I cant find a message in PO,
In ECC ERP there is a Message in SXI_Monitor with MessageID 5694189E-272E-0D70-E100-80000A010106, status; "Processed Successfully", in PO try finding in nwa->SOA->Monitoring->Message Monitoring->Database->Advanced->Identifiers (check)->Button Add (Message IDs Tab) pasted the MessageID from ECC
Result: "No messages available for selected filter criteria"
Try to find with 5694189E272E0D70E10080000A010106 also.
Scenario: XI 3.0 Sender to JDBC Receiver, in DB the message didn't arrive
Any idea where is the message?
Hi
I have multiple file-->po-->idoc scenarios. In the mapping I am populating control record field SNDPOR value correctly. But during runtime it is not getting picked. To make this worked I am populating SNDPOR value in idoc communication channel (override Idoc control headers). Any idea why it is not picking from mapping ? How to solve this problem ?
Thanks
kumar